Specification Summary:
Bolton Gate Company introduces the Fireroll VR60, a revolutionary EI rated product designed to provide both 60 minutes’ fire protection and 60 minutes’ heat insulation protection between individual compartments.
Up to the present time, the heat insulation requirement of a fire door was only met by unsightly hinged or sliding products with thick panels and the disadvantage of their associated space requirements. Due to the highly innovative and distinctly unique design of the Fireroll VR60, the product has all the advantages of a rolling fire shutter which can be stored above the false ceiling whilst at the same time meeting the challenging requirements of both integrity and insulation in line with the latest building regulations.
Resistance to Fire: E60 & EI(1)60
Tested on both internal and external orientations.
Face fixed arrangement.
Fire: Tested to EN1634-1 all in accordance with
EN13241:2003+A2:2016 & EN 16034:2014
Any application where protected escape routes are considered a factor i.e:
Schools, Universities, Warehouses, Storage Facilities, Factories, Shopping Centres, Malls, Car Parks.
Under normal circumstances, the door is electrically operated using a 400-volt nominal three phase gear motor mounted at one end. In a fire condition, an auxiliary 24-volt DC motor ensures that the door closes even if the mains supply fails. A control panel is provided which has the facility to receive an incoming fire single. This panel also incorporates the batteries necessary to operate the auxiliary motor.
Open, close, stop push buttons are provided on the face of the control panel for standard operation.
The curtain is constructed from 63 x 36mm laths comprising a synthetic material outer skin bonded to a special inner core consisting of high-performance insulation materials.
Stainless steel cables connect the laths together and are fastened to the roller at the head.
The bottom rail comprises a standard lath fitted with an extruded PVC bottom seal.
Manufactured from galvanised steel and formed into a channel profile which is prepared for bolting to the structure by means of continuous fixing angles.
The roller comprises a steel tube of adequate diameter and wall thickness to avoid deflection. Steel shafts and discs are inserted at each end and the whole assembly is supported on brackets at each end.
Fabricated from galvanised steel of adequate thickness relative to door size and supplied with steel plates for fixing to the structure.
A combination of galvanised steel ‘u’ profile and MDF board with a special fire protection cover is fixed to the lintel into which the top of the door engages providing an effective seal against the passage of flames and hot gases.
The curtain is self-finished grey with the perimeter intumescent seal in black.
6000mm wide x 5000mm high (subject to a maximum of 22m²)
Varies with opening size but approximately 50kgs/m².
